01388 488 150 
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 130 × 5 × 5 cm |
PARTS
Body/Chassis Mounting HDG – LR Defender LATER
Hot Dipped Galvanised, Land Rover Defender Body/Chassis Mounting
Used to fit the rear body to the chassis on the rear crossmember, as fitted on Td5 onwards, but will also fit early models when doing a chassis change over
Made from 3mm thick mild steel and are laser cut and CNC pressed with M8 weld nuts, ready to bolt in place
Please be aware there are some imperfections, i.e. excessive galv and in some instances where there was too much excessive galv, they have been flattened off before reaching mild steel and cold galv spray has been applied.
Land Rover Manufacturers part no. KVU101160
Excl. VAT £35.95 - £46.87
Incl. VAT £43.00 - £56.00
Related Products
-
Body/Chassis Mounting 5 tabs HDG – LR Defender EARLY
Excl. VAT £35.95 - £46.87
Incl. VAT £43.00 - £56.00 Add to -
Rear Cross Member to Chassis Later – LR Defender
Excl. VAT £4.60
Incl. VAT £4.60 -
Rear Floor Support – LR Defender & Series
Excl. VAT £14.95
Incl. VAT £14.95 -
S/S Rear Cross Member to Chassis Fixing Kit – LR Defender
Excl. VAT £11.50
Incl. VAT £11.50 -
Stainless Steel Rear Door Thresh, inc. Fixings – LR Defender 1987 onwards
Excl. VAT £19.55 - £19.55
Incl. VAT £23.00 - £23.00 Add to -
Rear Body Mounting – LR Defender & Series 2/3
Excl. VAT £36.05 - £78.95
Incl. VAT £43.00 - £95.00 Add to -
Rear Tub Underside Corner Stiffener – LR Defender & Series 2/3
Excl. VAT £9.95
Incl. VAT £9.95 -
S/S Rear Cross Member to Chassis Fixing Kit – LR Defender & Series 2 & 3
Excl. VAT £7.75
Incl. VAT £7.75