Land Rover Defender 90, 110/130 Pick Up/Hard Top, Strike Plate Repair & Seat Belt Bracket Mount Repair Part A

Category:

1 x 2 or 3 Door Front of Rear Tub Repair

Land Rover Defender 90 & 110/130 Hard Top or Pick Up (2 or 3 Door) Seat Box/Rear Tub repair panel. Made out of 2mm thick aluminium and are machine cut and CNC pressed for accuracy. This will repair the full width of front of rear tub To view workshop, click here

Clear
£21.85

1 x HDG Front Seat Belt Mount Bracket

These will fit Land Rover Defender 90, 110/130 Hard Top/Pick Up front seat belt mount bracket. Made from 2mm mild steel which has been CNC pressed and laser cut for accuracy then hot dipped galvanised Comes with M8 stainless steel studs to fix inertia reel and 7/16 nuts to fit the seat belts. Ideal to repair the common corrosion areas behind the seat at front of rear tub. If you have RC011 fitted you will require YRM 175A You are purchasing a pair. Please be aware there are some imperfections, i.e. excessive galv and in some instances where there was too much excessive galv, they have been flattened off before reaching mild steel and cold galv spray has been applied. To view workshop, click here

Clear
£86.25

1 x 2mm Aluminium Strike Plate Repair Section

If your rear tub ends are corroded on your Land Rover Defender or Series, instead of replacing the whole rear tub. Save money and time by just fitting the ends which are the part that often corrodes. These will fit any Defender or Series 2 or 3 Door. They are made from 2mm thick aluminium and also CNC cut and bent for accuracy. Easy to change over. Option A - Left Hand Side Option B - Right Hand Side Option C - Both Left Hand & Right Hand side To view workshop, click here

Clear
£9.77
Placeholder

1 x M8 30mm Fixing Kit S/S Pk 10

Manufactured from A2 stainless steel for increased corrosion resistance Kit Includes, 10no M8 A2 x 30mm Hex Head Bolts 20no M8 A2 Form C Washer 10no M8 A2 Flanged Serrated Nuts Thread Diameter, 8mm Thread Pitch, 1.25mm Head Height, 5.3mm Spanner Size, 13mm The length of the bolt is measured from the underneath the head (excluding head) Thread is full length

£5.69